Electromagnetic Vibrator Controllers

For Bowl / Liner feeders New Advance Version (CVCF) Constant voltage, constant frequency controllers for smooth vibration and constant feed rate irrespective of change in supply voltage and frequency for Genset application.
 
Specification :
 
Supply : 230 / 41 5 VAC 2 phase 50 Hz

Current : 3/6/10/15/30 Amp

Voltage setting : Via potentiometer / 4 to 20 mA control signal

Retransmission O/p : 4 to 20 ma for PLC

Protections : Overload and fast acting fuses.
 
VC - 101
LC - 202
Electromagnetic Vibrator Controllers
Electromagnetic Vibrator Controllers
 
VC - 101
LC - 202
96 x 96 x 160
VC1500-Full Wave &
VC800-Half Wave
 
Electromagnetic Vibrator Controllers
Digital Frequency Controller (DFC - 05)
DVC - 05
 
 
160 x 160 x 240
Digital Frequency Controller (DFC - 05)
DVC - 05
 
 

Vibrator Controller for Vibratory Feeders

Sai Control System has been manufacturing the quality vibrator controller. Since 1997 as on eof the largest manufacturer, we offer various model like Analog Voltage Controller, Digital Voltage Controller, Analog Frequency Controller & Digital Frequency Controller. Our Controllers are keeping pace with time with over 500 Satisfied Customers are spread all over india and abroad. We are committed to maintain high standards in quality & prompt service.
Our Voltage Controllers output is constant even though variation in Input Supply by ±20%.

General Features

• Digital/Analog Controller
• Large Supply Voltage Range: 180 to 260 Volt, 50 Hz/60Hz ,415 Volt, 2 Phase 50 Hz.
• Amplitude is controlled via Potentiometer/Keypad for Digital Model.
• Current Rating:- 3/6/10/15 Amp.
• Automatic Voltage Regulation:- If Input supply variation by ± 20%, Output of the controller will be constant.
• External 0-10V/4-20mA Input for speed rate regulation.
• Track control with sensor.
• Digital Display with Key Pad setting for Digital Model : DVC-05
• Retransmission Output : 4-20mA for PLC.
• Overload Protection & Fast Acting Fuses.

General Features

• Digital Display/Analog Models
• Built in softstart
• Large Supply Voltage Range: 180 to 260 Volt, 50 Hz/60Hz, 415 Volt, 2 Phase 50 Hz.
• Vibration Amplitude is control via Potentiometer/ Keypad for Digital Model.
• Current Rating:- 3/6/10/15 Amp.
• Automatic Voltage Regulation:- If Input supply variation by ± 20%, Output of the controller will be constant.
• Enable/Disable
• Track control with sensor & ON/OFF Delay.
• Digital Display with Key Pad setting for Digital Model : DVC-05
• External 0-10V/4-20mA Input for speed rate regulation.
• Fine & Course Dual Setting for Packing Machines.
• Retransmission Output : 4-20mA for PLC.
• Overload Protection.